Hikvision DS-3E1518P-EI/M 16 Port Gigabit Smart POE Switch

Hikvision DS-3E1518P-EI/M 16 Port Gigabit Smart POE Switch

• Part Number: DS-3E1518P-EI/M
• General
• Shell: Metal material
• Net Weight: 2.7 kg (5.9 lb)
• Gross Weight: 2.9 kg (6.4 lb)
• Dimensions (W × H × D): 440.0 mm × 220.8 mm × 44.0 mm (17.32” × 8.69” × 1.73”)
• Operating Temperature: 0 °C to 45 °C (0 °F to 113 °F)
• Storage Temperature: -40 °C to 85 °C (-40 °F to 185 °F)
• Operating Humidity: 5% to 95% (no condensation)
• Relative Humidity: 5% to 95% (no condensation)
• Power Supply: 100~240 VAC, 50/60 Hz, Max. 2.5 A
• Installation Mode: Rack (equipped with mounting ears)
• Max. Power Consumption: 150 W
• Power Consumption in Idle: 20 W
• Surge Protection: 6 KV
• Network Parameters
• Ports: 16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
• MAC Address Table: 8 K
• Switching Capacity: 56 Gbps
• Packet Forwarding Rate: 41.66 Mpps
• Internal Cache: 4.1 Mbits
• PoE Power Supply
• PoE Standard: IEEE 802.3af,IEEE 802.3at
• PoE Power Pin: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
• PoE Port: PoE: Ports 1 to 16
• Max. Port Power: 30 W
• PoE Power Budget: 130 W
• Software Function
• *Long Range:
• Ports 1 to 16: up to 300 m.
• Long range performance may vary depend on camera model or cable condition.
• *Port Isolation:
• Ports 1 to 16: port isolation mode to improve network security.
• Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
• PoE Watchdog: Ports 1  to 16: auto detect and restart the cameras that do not respond.
• *Link Aggregation:
• Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
• Support static link aggregation.
• Support 8 aggregation groups.
• *Loop Prevention:
• Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
• Support 802.1D STP.
• Suppport 802.1w RSTP.
• *VLAN:
• VLAN is used for network scale planning and network health improvement.
• Support 802.1Q.
• Configurable VLAN ID from 1-4094.
• Support Trunk, Access port mode.
• Support Max. 32 VLAN.
• *HPP
• Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
• 1. Display the port rate.
• 2. Display the port bandwidth utilization rate.
• 3. Display the PoE power usage.
• 4. Display topology information.
• 5. Display the alarm status.
• 6. Restart ports and devices.
• 7. Enable port long-rage mode.
• 8. Remotely upgrade the device.
• *System Maintenance:
• Support device management via web.
• Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
• Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
• Support remote management via Hik-Partner Pro.
• Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
• Support 802.1ab LLDP for peer device discovery.
• Support port mirroring for fault locating.
• Approval
• EMC: CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
• Safety: CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
• Chemistry: CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)